We have expert teams to solve your problem
TARIFA INDONESIA
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
tel/fax: 62-22-87825909
direct: 081221952411
082218117756
Sensorex’s new in-line high-temperature and high-pressure CS875 conductivity sensor has been designed especially for use in industrial boilers. This rugged sensor provides accurate, repeatable conductivity measurements at saturated steam conditions up to 600 psig (41.4 bar) and temperatures up to 486°F (252°C) without cooling the process sample.
Sensorex High-Temperature, High-Pressure Conductivity Sensor for Boilers
The sensor enables continuous automatic blowdown control, minimizing corrosion and scaling. By eliminating excessive blowdown in higher pressure boilers, energy and treatment chemical use can be reduced. The CS875 sensor is designed for use with most makes and models of conductivity transmitters or controllers.
Sensors have 3/4? male NPT mounting threads with a 1” insertion depth for easy installation. Both the body and the measuring pin are constructed of 316 stainless steel. A special thermally resistant PEEK insert and high temperature Perfluoroelastomer o-rings ensure reliability at extreme boiler temperatures. Two models are available to suit application requirements – the CS875HT, and the CS875HTTC with ATC temperature element.
Contact our marketing for further information and price : This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Monitoring UV-Transmittance is an important part of UV system control. The Sensorex UVT-LED is the world’s smartest UV-T monitor and incorporates a UV-C LED light-source in place of a conventional mercury lamp. The LED operates at 254nm across a 1cm path length.
Why is measuring UVT Important?
This ensures extremely stable readings in all conditions, over an extended lifetime. The process unit uses a single lamp and sensor, and our patented wiper auto cal system eliminating or minimizing drift seen in designs using multiple lamps and sensors. The process model can be installed directly into a pipe or open channel. 4-20mA communication allows integration into DAC, PLC or SCADA systems. With the smallest footprint in the industry, it is simple to install.
The handheld version it is ideal for field use. Battery powered, single button interface, no warm-up time required and lightweight construction; this unit features the LED high performance of the process model. With long lamp life, it’s the smartest solution for reliable UVT water testing.
Part Number Description
UVT-LED--H Handheld, Off-Line Transmittance Monitor w. battery
UVT0001 Carrying Case
UVT-LED-PW Process Transmittance Monitor (with wiper/auto cal.)
UVT0009 Installation Kit, Stainless Steel Pipe
UVT0008 Installation Kit, Mild Steel Pipe (2" NPT)
UVT0021 Installation Kit, PVC Pipe (2" NPT)
UVT0007 Installation Kit, Open Channel
UVT0015 Installation Kit, Sanitary Flow Cell (3”)
The 316 stainless steel construction withstands both cleaning in place and steam sterilization processes up to 130°C. Two models CS615 and CS620 are available for 1”-1.5” and 2” tri clamp flanges. For compatibility with a number of instrumentation models, both sizes come with optional automatic temperature compensation (ATC). Pt1000, Pt100, or user specified ATC values are available.
Cell constants offered with the CS615 are 0.01, 0.1 and 1.0, which allow the sensors a wide measurement range in most applications from pure water to general industrial use. Special cell constants are available on request. The sensors come with a 10 foot cable with tinned wire terminations for connection to process monitoring instrumentation.
Contact our marketing for further information at This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Page 1 of 6
