We have expert teams to solve your problem
TARIFA INDONESIA
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
tel/fax: 62-22-87825909
direct: 081221952411
082218117756
Sensorex’s new in-line high-temperature and high-pressure CS875 conductivity sensor has been designed especially for use in industrial boilers. This rugged sensor provides accurate, repeatable conductivity measurements at saturated steam conditions up to 600 psig (41.4 bar) and temperatures up to 486°F (252°C) without cooling the process sample.
Sensorex High-Temperature, High-Pressure Conductivity Sensor for Boilers
The sensor enables continuous automatic blowdown control, minimizing corrosion and scaling. By eliminating excessive blowdown in higher pressure boilers, energy and treatment chemical use can be reduced. The CS875 sensor is designed for use with most makes and models of conductivity transmitters or controllers.
Sensors have 3/4? male NPT mounting threads with a 1” insertion depth for easy installation. Both the body and the measuring pin are constructed of 316 stainless steel. A special thermally resistant PEEK insert and high temperature Perfluoroelastomer o-rings ensure reliability at extreme boiler temperatures. Two models are available to suit application requirements – the CS875HT, and the CS875HTTC with ATC temperature element.
Contact our marketing for further information and price : This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Monitoring UV-Transmittance is an important part of UV system control. The Sensorex UVT-LED is the world’s smartest UV-T monitor and incorporates a UV-C LED light-source in place of a conventional mercury lamp. The LED operates at 254nm across a 1cm path length.
Why is measuring UVT Important?
This ensures extremely stable readings in all conditions, over an extended lifetime. The process unit uses a single lamp and sensor, and our patented wiper auto cal system eliminating or minimizing drift seen in designs using multiple lamps and sensors. The process model can be installed directly into a pipe or open channel. 4-20mA communication allows integration into DAC, PLC or SCADA systems. With the smallest footprint in the industry, it is simple to install.
The handheld version it is ideal for field use. Battery powered, single button interface, no warm-up time required and lightweight construction; this unit features the LED high performance of the process model. With long lamp life, it’s the smartest solution for reliable UVT water testing.
Part Number Description
UVT-LED--H Handheld, Off-Line Transmittance Monitor w. battery
UVT0001 Carrying Case
UVT-LED-PW Process Transmittance Monitor (with wiper/auto cal.)
UVT0009 Installation Kit, Stainless Steel Pipe
UVT0008 Installation Kit, Mild Steel Pipe (2" NPT)
UVT0021 Installation Kit, PVC Pipe (2" NPT)
UVT0007 Installation Kit, Open Channel
UVT0015 Installation Kit, Sanitary Flow Cell (3”)
The 316 stainless steel construction withstands both cleaning in place and steam sterilization processes up to 130°C. Two models CS615 and CS620 are available for 1”-1.5” and 2” tri clamp flanges. For compatibility with a number of instrumentation models, both sizes come with optional automatic temperature compensation (ATC). Pt1000, Pt100, or user specified ATC values are available.
Cell constants offered with the CS615 are 0.01, 0.1 and 1.0, which allow the sensors a wide measurement range in most applications from pure water to general industrial use. Special cell constants are available on request. The sensors come with a 10 foot cable with tinned wire terminations for connection to process monitoring instrumentation.
Contact our marketing for further information at This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Sensorex Smart Aqua Meter (The SAM-1™ )
Sensorex as a leading company from USA in sensor technology introduces a new product Smart Sensor Aqua meter, SAM-1™
The SAM-1™ SMART AQUA METER from SENSOREX turns your smart phone or tablet into a powerful and convenient pH, ORP or conductivity meter. Simply plug the SAM-1™ into the audio jack of your smart phone or tablet then plug in the smart sensor and you are ready to take accurate readings. Sensor is auto-recognized and calibration data read from the smart sensor. Measure samples in the lab, field or plant and share readings via e-mail. Readings can be identified by unique name or GPS location. Download readings as .csv files for use in spreadsheetsl or for record retention More sensor input types will be available in the future with seamless software updates. SAM-1™.
The SAM-1™ is language aware and supports several languages. The IOS software will release March 1, 2014 and Android version will be available May 1, 2014. To learn more visit our SAM-1, www.SmartAquaMeter.com
Click below to see
Now everyone can use sensor in laboratory, industry, field and future hydroponic garden, Enviromental Monitoring, Education, Wastewater Compliance, Aquaculture, Hydroponics, Quality Control, Drinking Water, Municipal Water, Wine and Beverage and etc.
Please contact PT. Tarifa Indonesia (Official Distributor of Sensorex in Indonesia) for furher information at This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Process pH Sensor
Sensorex is the leading process pH sensor manufacture in the world. We have three type process pH sensor. General process pH sensor, S8000 process pH sensor and S600 process pH sensor
S8000 series modular process pH sensor : Our premium pH electrode solution that saves you time and money for all your pH meaurement needs. The S8000CD or S8075CD flat surface pH electrodes are based on a modular concept designed to save you time and money. Click here for more information
S600 series process pH sensor : The S600 series of flat surface pH electrodes changed the way the world approached process pH measurements. Available in configurations for in-line, side stream, insertion, and submersion, these pH electrodes save time and money and provide users with real benefits. Click here for more information
General process pH sensor : These high quality general purpose pH electrodes will provide excellent performance at a price that offers superior value. They are provided with the cables fixed and hard-wired to the electrode or with our popular cartridge style connections (series S222).
Contact our marketing for information of your process pH sensor.
PT. TARIFA INDONESIA is official authorized distributor of Sonic and Material Inc product in Indonesia. You can explore ultrasonic system http://www.sonics.com/index.php . You can contact us for your ultrasonic system.
We have ultrasonic processing system for example Vibra-cell and its accecoris.
The Vibra-Cell™ is the most technologically advanced high intensity ultrasonic processor available to the researcher. Extremely capable and versatile, it can safely process a wide range of organic and inorganic materials – from microliters to liters. Typical applications include: sample preparation, dispersion, cell lysing, desegregation, homogenization, particle size reduction, soil testing, transesterification (including biodiesel production), nanotechnology (including nanoparticle and Graphene dispersion), acceleration of chemical reactions, degassing and atomization.
Our line product have capacity form few ?L to over 20 L. You can download our catalog here
You can see the video of vibra cell system system here
This is example of Vibra-Cell system:
1. VCX 130
Feauture:
pH/ORP transmitters are prominent to control pH in chemical, biological, water/waster water system . The best choice is our new TX100 two-wire pH/ORP transmitter. It features a local display for real time measurements and aids in calibration. Packed with powerful features, this unit features an array of user selectable options as well as input to output isolation and a multitude of mounting options. And this is all for a fabulous price that is just slightly more than the ORPMA. Units require 12-36VDC power. When you need premium pH/ORP transmitter, so you can choose TX-2000 and TX-3000. To learn more,download the specifications or read in www.sensorex.com
MODEL TX100 TX-3000 TX-2000
Hubungi marketing kami untuk kebutuhan sensorex anda at : 081221952411
Page 1 of 3
